TAS System
Choose what you are doing, open that routine and follow it from top to bottom. You only need to read one route.
MAINTENANCE WASH
For a regularly cared-for vehicle
1 · Wheel Cleaner
Clean and rinse the wheels before starting on the bodywork.
Apply as the pre-wash, do not allow it to dry, then rinse thoroughly.
Wash from the top down with a clean mitt, then rinse.
4 · Dry
Dry the paint, glass, trim and tyre sidewalls with clean microfibre towels.
5 · Quick Detailer
Apply to the clean, dry paint and buff clear for gloss and protection.
6 · Final touches
Tyre Shine on dry sidewalls, then Glass and Mirror on the glass last.
FULL EXTERIOR DETAIL
For heavier dirt and contamination
1 · Wheels
Use Wheel Cleaner. If iron or stubborn brake dust remains, add Fallout Remover, then rinse.
ONLY IF NEEDED · Engine Bay Cleaner
Use before washing the body, with the engine switched off and completely cool.
2 · Pre-wash
Apply Citrus Power Wash, allow it to work without drying, then rinse thoroughly.
ONLY IF NEEDED · Tar and Bug Remover
After the pre-wash rinse, treat affected areas only and rinse again.
3 · Contact wash
Use Foaming Contact Wash with a clean mitt, working from the top down, then rinse.
ONLY IF NEEDED · Fallout Remover
If the washed paint still feels rough or shows iron contamination, treat it now and rinse thoroughly.
4 · Dry
Dry every treated surface completely before applying finishing products.
5 · Finish and protect
Quick Detailer on paint, Plastic Dressing on clean dry trim and Tyre Shine on dry sidewalls.
6 · Glass last
Finish with Glass and Mirror so all overspray and residue is removed.
INTERIOR CLEAN
Clean, clear and freshen the cabin
Clean suitable interior surfaces first. Test delicate materials and avoid suede finishes.
2 · Plastic Dressing
Apply sparingly to clean, dry suitable plastic trim, then remove excess.
3 · Glass and Mirror
Clean the interior glass after the other surfaces to remove any overspray.
4 · Signature Apple
Use last, once the cabin is clean and dry.
WHEELS & TYRES
Clean, decontaminate and finish
1 · Wheel Cleaner
Apply, clean the wheel safely and rinse thoroughly.
IF CONTAMINATION REMAINS · Fallout Remover
Treat the affected wheel areas, do not let it dry, then rinse again.
2 · Dry
Dry the wheels and tyre sidewalls completely.
3 · Tyre Shine
Apply to the sidewall only, away from the tread and braking surfaces, and allow it to dry before driving.
Always work on cool surfaces out of direct sunlight. Never allow a cleaning product to dry, and follow the directions and safety information on each product label.